PALLO
04-21 01:51 PM
[QUOTE=fromnaija;335920]Yes, if you are sure of moving back to the job location specified in the Labor Certification you may not have to restart the process. If you know you will not move back, youand your employer will be commiting immigration fraud if a new LC is not applied.
what kind of evidence you need to provide to show the intention that you will move back to the original location!
what kind of evidence you need to provide to show the intention that you will move back to the original location!
wallpaper Unreal love in Paris
sr77
09-26 08:32 PM
Don't be. You will be current in Oct and I believe going forward (chances of retrogressing to 2005 is very slim if at all there is any retrogression).
That said, don't wait for USCIS. Be proactive and do all you can. I would suggest
1. Calling the USCIS customer service (get hold of level 2 rep by telling the level 1 your case is outside normal processing time) and try to get the status of your case. Might take few tries before you can get some info.
2. Open an SR.
3. Do the above for your dependents if any.
4. Make infopass (you have already done this).
5. Contact local congress man/woman.
6. Send mail to CIS Ombudsman
7. If your security check is not cleared yet, you can contact FBI (by phone) and find out the status.
(more information on all these can be gotten from simple google search. If not, post here and some one here should be able to help you.)
Good luck.
Thanks for the advice. I appreciate your insight.
I am going all in now.
1. I will call the Customer Service Line tomorrow.
2. I already got the InfoPass for 10/6
3. The letter for my senator is drafted. It will be sent tomorrow.
4. Finally, an email to the Ombudsman has been sent.
Hopefully, there is be some movement.
That said, don't wait for USCIS. Be proactive and do all you can. I would suggest
1. Calling the USCIS customer service (get hold of level 2 rep by telling the level 1 your case is outside normal processing time) and try to get the status of your case. Might take few tries before you can get some info.
2. Open an SR.
3. Do the above for your dependents if any.
4. Make infopass (you have already done this).
5. Contact local congress man/woman.
6. Send mail to CIS Ombudsman
7. If your security check is not cleared yet, you can contact FBI (by phone) and find out the status.
(more information on all these can be gotten from simple google search. If not, post here and some one here should be able to help you.)
Good luck.
Thanks for the advice. I appreciate your insight.
I am going all in now.
1. I will call the Customer Service Line tomorrow.
2. I already got the InfoPass for 10/6
3. The letter for my senator is drafted. It will be sent tomorrow.
4. Finally, an email to the Ombudsman has been sent.
Hopefully, there is be some movement.
freedom_fighter
01-14 12:50 PM
Today me and my wife got our CPO emails. Mine was filed in Eb3 and my wife's was in Eb2. I got my approved though my wife.
I've been in US for 10 years... now i've two things to do
1. Wonder was it really worth this wait.
2. Move to the citizen line.
thanks IV, for all the support.
I'll not be going anywhere..My life has been on IV for all these years and now i don't know what to do because I've been addicted to come to IV every hour of my life these past years. I still remember pressing F5 during the july fiasco bulletin.
:cool:
I've been in US for 10 years... now i've two things to do
1. Wonder was it really worth this wait.
2. Move to the citizen line.
thanks IV, for all the support.
I'll not be going anywhere..My life has been on IV for all these years and now i don't know what to do because I've been addicted to come to IV every hour of my life these past years. I still remember pressing F5 during the july fiasco bulletin.
:cool:
2011 to Black and White. Paris
dtekkedil
07-05 02:21 PM
by now everybody might have heard stories about how USCIS pulled staff and worked overtime and weekends to utilize the 60k visas in one month to prevent the july 485 filings.
What I am wondering is why did they do it. One obvious reason is the incresed fee comming into effect from July 30 2007. In addition to it what are the other reasons.
Is there any agenda within USCIS to prevent people from getting EAD and ac21 benefits?
Is USCIS filled with anti immgrant mentality who have takem upon themselves to make our lives difficult?
My guess is that this was done by the Bush Govt! So that there would be an outcry and he can get his CIR bill back into the senate. I hope it works!
What I am wondering is why did they do it. One obvious reason is the incresed fee comming into effect from July 30 2007. In addition to it what are the other reasons.
Is there any agenda within USCIS to prevent people from getting EAD and ac21 benefits?
Is USCIS filled with anti immgrant mentality who have takem upon themselves to make our lives difficult?
My guess is that this was done by the Bush Govt! So that there would be an outcry and he can get his CIR bill back into the senate. I hope it works!
more...
getgreensoon1
04-07 04:02 PM
You mean those passing from the likes of TVU and ITU or those from Harvard/MIT ?? How do you define "reputed" US University ? And why do you think clients engage "underskilled" operators and not "skilled" US graduates ? Lower rate ? But then we see so many US graduates languishing in EB 3 ???
BTW, why are you still having a hard time getting visa --- the quota was wide open till January at least .
There is no point blaming on non-US students when US students are making a beeline to desi consultants for H1. May be the law should be -- no consulting job for US graduates.
A reputed university = very few or no gultis. TVU had only gultis...so did not qualify.....
BTW, why are you still having a hard time getting visa --- the quota was wide open till January at least .
There is no point blaming on non-US students when US students are making a beeline to desi consultants for H1. May be the law should be -- no consulting job for US graduates.
A reputed university = very few or no gultis. TVU had only gultis...so did not qualify.....
daniel_leavitt2000
February 15th, 2004, 05:29 PM
I have a Sony DSC F717. I got it to photograph model trains, so it is almost lways in macro mode. Frequently, the image blurs toawrds the back, even when set at the highest F-stop. The subject is usially about 5-12 inches away from the camera, depending on the model I am photographing. The models are about an inch high and up to 10 inches long.
I suspect a wide angle lense should help this, but sony has two available for their 58MM bezel. Am i right on this? Basically i want close up on full manual with
as good a depth of fied as possible. Here are the choises:
http://www.sonystyle.com/is-bin/INTERSHOP.enfinity/eCS/Store/en/-/USD/SY_DisplayProductInformation-Start;sid=C5ukSQtNKAGkcEti_UiuQkRd1gcWOHL-Dh0=?CategoryName=dcc_DIAccessories_DILensesandFil ters_Lenses&Dept=dcc&TemplateName=item%2fsy_item_b&ProductSKU=VCLMHG07A
This one costs $150, includes two peice glass.
http://www.sonystyle.com/is-bin/INTERSHOP.enfinity/eCS/Store/en/-/USD/SY_DisplayProductInformation-Start;sid=C5ukSQtNKAGkcEti_UiuQkRd1gcWOHL-Dh0=?CategoryName=dcc_DIAccessories_DILensesandFil ters_Lenses&Dept=dcc&TemplateName=item%2fsy_item_b&ProductSKU=VCLHG0758
This one is $400, and is a three peice glass.
Both have the same .7x magnification. Wich one should I get?
I suspect a wide angle lense should help this, but sony has two available for their 58MM bezel. Am i right on this? Basically i want close up on full manual with
as good a depth of fied as possible. Here are the choises:
http://www.sonystyle.com/is-bin/INTERSHOP.enfinity/eCS/Store/en/-/USD/SY_DisplayProductInformation-Start;sid=C5ukSQtNKAGkcEti_UiuQkRd1gcWOHL-Dh0=?CategoryName=dcc_DIAccessories_DILensesandFil ters_Lenses&Dept=dcc&TemplateName=item%2fsy_item_b&ProductSKU=VCLMHG07A
This one costs $150, includes two peice glass.
http://www.sonystyle.com/is-bin/INTERSHOP.enfinity/eCS/Store/en/-/USD/SY_DisplayProductInformation-Start;sid=C5ukSQtNKAGkcEti_UiuQkRd1gcWOHL-Dh0=?CategoryName=dcc_DIAccessories_DILensesandFil ters_Lenses&Dept=dcc&TemplateName=item%2fsy_item_b&ProductSKU=VCLHG0758
This one is $400, and is a three peice glass.
Both have the same .7x magnification. Wich one should I get?
more...
Anders �stberg
June 4th, 2004, 01:32 PM
Went back to the local lake to stir up some waves and bubbles for a reshoot for FM forums
"Weekly Assignment #117: Blue"... what do you think?
(I chose the second picture for the contest, calling it "Smooth sailing". :) )
(100-400 @ 400mm, 1/640s, f/8, ISO 400)
http://www.andersostberg.com/fotogalleri/albums/userpics/10001/BubblesFramed_5450.jpg
(100-400 @ 400mm, 1/500s, f/8, ISO 400)
http://www.andersostberg.com/fotogalleri/albums/userpics/10001/WA117_BubbleVer3Framed_5455.jpg
"Weekly Assignment #117: Blue"... what do you think?
(I chose the second picture for the contest, calling it "Smooth sailing". :) )
(100-400 @ 400mm, 1/640s, f/8, ISO 400)
http://www.andersostberg.com/fotogalleri/albums/userpics/10001/BubblesFramed_5450.jpg
(100-400 @ 400mm, 1/500s, f/8, ISO 400)
http://www.andersostberg.com/fotogalleri/albums/userpics/10001/WA117_BubbleVer3Framed_5455.jpg
2010 Paris in Black amp; White
reachinus
12-24 12:44 PM
If you don't get the regular W2, then you fill in all the details that you know are correct and submit it along with your tax filings saying that you asked your employer to issue you the W2/Correct W2 with all the Pay info, but since he didn't give you the correct W2 your are using a non standard W2. IF u google it I am sure u will find it.
Its better to have pay stubs for all the time that you are on H1 to avoid future problems.
Its better to have pay stubs for all the time that you are on H1 to avoid future problems.
more...
luckylavs
07-17 04:58 PM
one silly question. How weeks do we have in hand to file 485?
hair All Photos, Black amp; White,
jonty_11
07-16 03:28 PM
please also post ur details, PD, Country ND, RD etc...
more...
rb_248
04-01 12:05 PM
Congrats to GreenGuru. and thanks for sharing all the information.
IV admin, can we have a separate option on the details to show that GC is already received. Like rb_248 got it last september and he/she still comes here and shares his knowledge. so having that option display would be gr8.
cheers/
Yes. I agree. There should be a category for I485 approved date. But, I could have also inserted that in my signature.
IV admin, can we have a separate option on the details to show that GC is already received. Like rb_248 got it last september and he/she still comes here and shares his knowledge. so having that option display would be gr8.
cheers/
Yes. I agree. There should be a category for I485 approved date. But, I could have also inserted that in my signature.
hot More lack and white
rb_248
03-28 08:37 AM
I think it will stay where it is now for this quarter.....just my guess. Then for the last quarter, we may see some advancement.....again this is my guess.
more...
house Paris in Black amp; White
gcnotfiledyet
06-23 02:54 PM
White House Says Immigration Reform Unlikely in �09 - Roll Call (http://www.rollcall.com/news/36115-1.html)
Still unlikely I would not take a word from Gibbs. He never knows anything.
Still unlikely I would not take a word from Gibbs. He never knows anything.
tattoo by panoramic paris black
REEF�
06-11 05:43 PM
suuurree..
more...
pictures in lack and white paris
lacrossegc
07-30 03:33 PM
When do you get FP notices?
dresses Paris - Black amp; White (High
irrational
06-18 10:37 PM
Folks,
I am due for an EAD renewal. However, my I-485 Receipt Notice got lost in mail. :(
Can I still e-file. A lot of you said, we have to send a copy of the receipt notice as a supporting document. Can I do without it.
Any pointers would be really appreciated.
Thank You
-Bipin
I am due for an EAD renewal. However, my I-485 Receipt Notice got lost in mail. :(
Can I still e-file. A lot of you said, we have to send a copy of the receipt notice as a supporting document. Can I do without it.
Any pointers would be really appreciated.
Thank You
-Bipin
more...
makeup Black and white
realist
11-19 02:10 PM
Were none of the people who tried from May of this year on this thread unsuccessful in getting their sibling here? Please help
girlfriend Black amp; White photo on Film
theshiningsun
02-24 03:50 AM
this is what i know
since I-140 is approved and I-485 is pending for more than 6 months therefore employer withdrawing I-140 will hv no effect on GC process
u can get copy of I-140 approval by filing FOIA rqst but it takes about 4-5 months
again, this is what i know but i am not a lawyer, pls consult an attorney b4 any action
btw how does ur employer expect that u not go to another company if u r going to lose ur job with him?
since I-140 is approved and I-485 is pending for more than 6 months therefore employer withdrawing I-140 will hv no effect on GC process
u can get copy of I-140 approval by filing FOIA rqst but it takes about 4-5 months
again, this is what i know but i am not a lawyer, pls consult an attorney b4 any action
btw how does ur employer expect that u not go to another company if u r going to lose ur job with him?
hairstyles paris black and white - 128897
FinalGC
09-15 11:50 AM
How about sending a letter to the President, using the above suggested structure....asking him to pressurize the congressmen to pass 5822 from the House.......so that he can sign that into law before Nov 4 elections....
saurav_4096
06-16 10:00 PM
How does AC21 will come into play when a person files I-485 with the letter from employer that employment will be availabe once green card is issued.
Does person has to join the employer after green card is issued ? As Green card will be availabe only after 180 days of filing.
Gurus, if someone knows such please reply.
Thanks
Saurav
Does person has to join the employer after green card is issued ? As Green card will be availabe only after 180 days of filing.
Gurus, if someone knows such please reply.
Thanks
Saurav
OlgaJ
February 20th, 2004, 07:25 AM
Don't you worry, Scott, my toes can take it. LOL!
Yes, you are right. I calculated that wrong. So let's see:
Assuming 12inch distance:
38mm (9.7) at f8, near 9.99, far 15
28mm (7.3) at f8, near 8.84, far 18.7
That does sound more reasonable given it's a digicam.
Olga
Yes, you are right. I calculated that wrong. So let's see:
Assuming 12inch distance:
38mm (9.7) at f8, near 9.99, far 15
28mm (7.3) at f8, near 8.84, far 18.7
That does sound more reasonable given it's a digicam.
Olga